Printmaking: Drypoint

First test proof. You can see areas where the line isn't deep enough for the ink.

Final print - all of the elements showing up nicely.

I took another printmaking class because I wanted to try drypoint. I carved straight into the plate with a needle tool and this method is called drypoint. It's very similar to what I did last time, but this round, I skipped the etch process, which eats into the plate.  It's a much more controlled outcome because what you carve is what you get. Of course there's still the variable of how much ink you use. After the plate is totally inked, you can wipe it off in very decisive ways depending what you're after. I feel satisifed that I got a print that I'm happy with. 

Incidentally, I used water soluble ink for this print, whereas the last round was done with oil-based ink.

I'm not sure I like my work as much in black and white. And I miss the hand quality that an actual painting has. So, hard to say if I will continue with this. Much fun to play with!

Folk Art Treasures

I recovered some full-sized images from Christmas break and was taking another look at these beauties. Unfortunately they were on display in a flourescent/basement/side room (ugh) --- that's not normally open to the public (score!). So the pictures are crappy - but I love these. They make me want to make something. I think the jug in the middle was called a memory jar. Seems doable. 
Photos from the DeWitt Wallace Decorative Arts Museum.

Landshapes

 

The idea for this series came to me the other day. I think of them as idealistic landscapes, boiled down to simple shapes. I'm pretty excited about them. Still in progress and don't know what I'll do with them. 

Printmaking Like the Masters

Original drawing on the right with zinc plate on the left

Etch bath

Etched plate ready for ink and printing

Final print

I've always wanted to try etching and I finally had a chance recently when I took a short half-day class of  non-toxic etching with A & C studios. It's a beautiful studio space and I couldn't recommend our instructor, Cathrine enough. 

The basic steps are as such...

First you coat the zinc plate with a thin clear layer of floor finish which dries and just leaves a very thin coating to scratch through. Then you transfer your drawing onto the zinc plate and scratch into the plate with a pointed etching tool. The tools have the finest tip on them. Being able to get that tiny level of detail lived up to my wildest dreams!

When you're done scratching, the plate goes into the etch bath for 12 minutes, which ended up being a bit too long for my drawing. You can see at the top of the plate and the print that it's too textured. It's a lovely effect if that's what you're into.

The plate is covered with ink and run through the press, onto handmade cotton paper (at least, that's what we printed on) that is damp.

Of course, once you see the print, you can go back and keep going with more etching or more scratching or what have you.

I think the biggest thing I learned was exactly how much variation and technique there is to this process. And how wildly the technique can vary and that each print is truly unique. 

I look forward to more of this.